To ensure accuracy and reliability in your skydrol recovery cart, proper maintenance and care protocol should be followed. If proper protocol is not followed, this could lead to damages and/or malfunctions in your cart. Follow these maintenance steps below to ensure accuracy in your cart:
Lubricate all four wheel hubs and front truck swivel annually with general purpose grease
Check reservoir and fittings for leaks
Check for bending, cracking, and dents in the cart
Inspect wheels for severe wear
Check towing eye for bending, excessive wear, and/or deformity
Check towing eye mounting bolts, ensure fasteners are not loose or missing. Tighten to 25 ft-lbs or replace as required
Check and replace air desiccant filtration
Following these calibration steps will ensure the functionality and accuracy of your equipment.
THE BENEFITS OF USING AN ACCREDITED CALIBRATION LAB
Aircraft Jacks are a common tool used in aircraft maintenance. Aircraft jacks allow maintenance technicians to elevate the aircraft for maintenance, inspection, and repairs. There are two main types of aircraft jacks, the axle jack and tripod jack. The axle jack is mainly used for brake service and maintenance involving tire and wheel repairs or […]
There are several systems in an aircraft with different technologies all aimed at ensuring the safe operation of the aircraft from departure through to shut down at the destination. One of the newest and most important technologies becoming standard in the aviation industry is Automatic Dependent Surveillance-Broadcast, better known as ADS-B. ADS-B enhances safety by […]
e2b calibration is an ISO/IEC 17025 ACCREDITED calibration and repair laboratory providing a full scope of NIST TRACEABLE calibration, test, and measurement services for AEROSPACE equipment. Services are provided in a climate-controlled, state-of-the-art laboratory with ON-SITE SERVICES, and local pick-up and delivery available on request. A cloud-based document and ASSET MANAGEMENT PORTAL provides customers with instant access to certificates of calibration, asset information, and reports.